Rod / Line Sources

The products shown on these pages are representative sources used for common applications.If you cannot find the product with your specifications, please contact us using the corresponding email contact on this website.In most cases we will be able provide you with a solution meeting your requirements.You can also use our product request forms.

Application:

These two line sources sets are designed for the use with IGOR and OLGA body phantoms for the calibration of a whole body counter.

Single nuclide sources with other activities and number of line sources are available on request.

Example:

Total activities for all sources: Ba-133: 50kBq, Cs-137: 30kBq, Co-60: 60kBq

Mixed Nuclide Gamma Reference Source Set 1 Product code: QCRB19777
Total activity:	115 kBq
Activity tolerance:	+/- 10%
Consisting of 180 line sources:	each:
	Ba-133 with 227 Bq
	Cs-137 with 136 Bq
	Co-60 with 273 Bq
Total activity calibrated:	DAkkS certificate
Estimated measurement uncertainty:	<= +/- 10% (k=2)
Drawing:	VZ-3891-002
Density:	1,1 g/cm³
Overall dimensions:	each ø 6mm x 163 mm
Activity homogeneous in epoxy resin in an acrylic glass tube.The activity of each line source is equivalent to 1/180 part with a certain tolerance range.

Mixed Nuclide Gamma Reference Source Set 2 Product code: QCRB19778
Total activity:	25,5 kBq
Activity tolerance:	+/- 10%
Consisting of 80 line sources:	each:
	Ba-133 with 114 Bq
	Cs-137 with 68 Bq
	Co-60 with 137 Bq
Total activity calibrated:	DAkkS certificate
Estimated measurement uncertainty:	<= +/- 10% (k=2)
Drawing:	VZ-3891-002
Density:	1,1 g/cm³
Overall dimensions:	each ø 6mm x 163 mm
Activity homogeneous in epoxy resin in an acrylic glass tube.The activity of each line source is equivalent to 1/80 part with a certain tolerance range.

csm DSCN2530 image

csm L1070029 image

csm L1070030 image

csm 26254cc5d8 image

Back to overview – Geometry Sources

EG type

Application:

These EG-line sources have been designed for the calibration of waste drum measurement systems.

Description:

Overall Dimensions: diameter 9,53mm x 813mm length; 0,89mm thick wall made from Aluminium. Both ends of the tube are capped with 2mm end plugs, glued wth epoxy resin to give an active length of 809mm. The activity is uniformly dispersed in epoxy resin of 1.0g/cc density. All activities are calibrated, traceable to the National Institute of Standards and Technologies (NIST) /USA. ISO classification: ISO/12/C22212

Product Code	Isotopes	Activities	Total Activity
EG-1830-LINE	Am-241Ba-133Eu-152Cs-137	800kBq (2.16µCi)450kBq (12.16µCi)450kBq (12.16µCi)100kBq (2.7µCi)	1,8MBq (48.65µCi)
EG-1830-LINE-01	Am-241Eu-152	148kBq (4µCi)148kBq (4µCi)	296kBq (8µCi)
EG-1830-LINE-02	Am-241Eu-152	370kBq (10µCi)370kBq (10µCi)	740kBq (20µCi)
EG-1830-LINE-03	Am-241Ba-133Cs-137Co-60	370kBq (10µCi)1,11MBq (30µCi)185kBq (5µCi)185kBq (5µCi)	1,85MBq (50µCi)
EG-1830-LINE-03-1	Am-241Ba-133Cs-137Co-60	370kBq (10µCi)370kBq (10µCi)37kBq (1µCi)37kBq (1µCi)	444kBq (12µCi)
EG-1830-LINE-04	Ba-133Eu-152	277,5kBq (7.5µCi)277,5kBq (7.5µCi)	555kBq (15µCi)

Back to overview – Geometry Sources